Briquette Machine Maintenance

1. Before work of each shaft, the machine should be checked fully. If oil leakage is found, please replace seal component in time.

2. Before start, check whether the oil level in oil tank is lower, and open the circulation cooling water.

3. During start, check if the rotation direction of oil pump is correct.

4. Replace the hydraulic oil regularly, new machine should be replaced per three months, then replace it per half year and fully clean the oil tank.

5. Note: when the new machine has been used for 3 months, the hydraulic oil can be used again after filtering through strainer of above 100meshes.

6. The strainer of oil filter should be stripped and cleaned or replaced weekly.

7. During work in summer, please note change of oil temperature, the oil temperature should be controlled under 60℃, the cooling water should be opened and circulated during work every time.

8. When noise of oil pump is obviously large or the pressure can`t reach to setting value, it should be repaired or be replaced in time.

9. When the pressure of machine can`t reach to setting value under normal running of oil pump, seal component of oil pump should be replaced in time.

10. Keep the machine clean.

11. When machine stop after completion of each shaft, firstly jog pressure relief, then switch off power and clean foreign substance and feculence of machine.